Chaining Proxies and Wingates!!!

Posted on 29/12/2009 by


Hello!… All you wonderful people out there. 🙂 …Yes!…I’m back in action and it’s been long..very long! since I’ve posted on anarchia..actually to be honest I felt very Handycap and so empty….Well… you all must be wondering where have I disappeared??…LoL!…don’t worry I’ve been around but just been busy with University work and just completing alot of unfinished work.. but besides that I’ve been working with my administrator Ezzk who by the ways… also has to post and its high time! he posts something amazing!!!…and as we all know it he always does an outstanding job!!…neways Him and I are working on a very special project…and yes! there have been loads of ups and downs during this whole mess about the project!..But don’t worry everything is under control.
Today… I’m going to talk about Chaining Proxies and Wingates…Enjoy Reading! 😀

This tutorial is all about Chaining Proxies its only for the use of becoming more unidentified whilst your online. There aren’t sufficient tutorials about this subject so…I decided to make an effort at writing one. As we’re on the subject…I put a small section on chaining Wingates to become mysterious on Telnet.

I’m going to guess that most of you have already used a proxy before to hide your real IP address or domain or maybe just used one to surf secretly online. If you din’t well optimistically you can keep up and perhaps learn how to use a proxy. Its also better if you know what an IP address or Domain is first before reading this tutorial…Well I guess I have just show you where to find a proxy and the updated proxy websites are… and

And now its up to you to find out which ones work or not. You can check and see if the proxy works by going to to see if your IP address changed.

Proxy Servers
A proxy is a server that acts as an entry among your computer and your target. These proxies accept requests from users to see…
For example: A web page. The proxy will then pass on the request to the internet find your requested page then send the web page back to you as the user. Most proxies come with a cache feature that saves former websites that were visited on that proxy. Think of cache as a proxy’s storage room. Each site that you make the proxy visit, it saves in its own storage area (cache). So if the user or someone else requests the same site again later on, the proxy will go back into its cache, find the web page and send it back to the user. This saves time because the proxy doesn’t have to go search the Internet for the web page. It just pulls the site out of its cache.

The use of proxies to stay anonymous is a favorite thing to do among people on the Internet who are either paranoid or just security conscious. The anonymity factor comes from the proxy’s ability to hide your true Internet address. For example, if I were to run a scan on your computer right now, I would get the Internet address that was given to you by your ISP (internet service provider), but if I were to scan you while you were using a proxy, then I would get the Internet address of the proxy server. Basically the whole proxy picture looks like this…

[User]>>>>>[Proxy]>>>>>[Web Pages]

Simple enough, right? Right. So now let’s get to the chaining part.

Proxy Chaining
Proxy chaining is happily connecting to more than one proxy and then to your intended destination. You can use as many proxy servers as you can or want. The more you have, the more indistinctive you will be. Remember, it doesn’t matter how many proxies you chain together you will never be 100% indistinctive. Let’s look at an example…


The example shows that for a proxy chain to be made, the user must first connect to Proxy1. Once the user is connected to Proxy1 from Proxy1 the user will connect to Proxy2 from Proxy2 the user will connect to Proxy3 from Proxy3 the user will connect to Proxy4 from Proxy4 the user will then connect to the planned destination (web page, Unix server and ftp server etc.). All together we have 4 proxies in this example. Each proxy is a link in the chain. If the user would be scanned while on the proxy chain in the example the IP address or domain of Proxy4 would appear on the scan. Now the problem with proxies is they tend to die out in a few weeks or less and it all depends. So if Proxy2 were to cease working the chain wouldn’t work. You would need to get rid of Proxy2 and just use Proxy1 Proxy3 and Proxy4 or search for another proxy to take Proxy2’s place. This is why proxy chaining can be a real pain in the a** if you’re using them just to surf the internet. One dies you have to find out which one is the one not working, so you have to go through each one to check them or until you find the one that’s not working.

Proxy chaining is needeed if you plan on using proxies to cut off a “hack”. If you’re making an effort to gain unaware remote access to any server whether its through telnet, ftp, or http, chaining is important. As I said you will never be 100% anonymous no matter what you do online so its possible that you still can be tracked even if you chain proxies. Chaining just makes it a lot harder to track someone. To make it even harder its best to use foreign proxies because if someone wanted to trace you they would need to get logs of your use of each proxy from each proxy manager. This could take a little while or even never at all if one of the proxy’s or all for that matter belong to an admin in a country that isn’t too fond of the country you’re located in. The longer it takes for the authorities to order the logs of your usage of a single proxy from that proxy’s administrator the more chances that the other proxies that you used in the chain will have their logs wiped by the time anyone gets to the server administrators of those proxies. So when attempting to do any kind of “hack” it’s best you use at least five or six proxies in a chain.

HTTP Chaining
HTTP chaining is basically chaining a proxy server in your browser’s address bar.

Example… ://

Have you noticed how the above proxy and destination (yahoo) are seperated by a (-_-) If you wanted to make a chain out of this you would simply add another proxy ex. ( ://

Another way to use proxys in your address bar is by adding the proxy IP or domain then the port number. Example… :80/

Notice how the above proxy and destination server are seperated this time by a (/) forward slash instead of a (-_-) dash, underscore, dash. To make a chain out of this you would again simply add another proxy ex. ( http://proxy1 :80/http://proxy2:80/proxy3:80/

Browser Chaining
To browser chain is pretty easy. I’ll use Internet Explorer as an example since I just know its the browser that most people have and use. First you need to find the Internet Options. You can do this by finding the Explorer icon on the desktop right click on it, then press properties or if you have a browser window already opened if you are online then you can go to Tools and press Internet Options. Now that you have the Internet Options window up you can now go to the Connections tab, then go to the first Settings button and click it…then you should be in the Settings box. Put a check in the box where it says to Use a proxy server…and if you wanted to surf using one proxy you would happily put the proxy in the Address: space and put the proxy’s port number in the Port: space. To use a chain here you would put in a proxy along with a “:” then the port number followed by a space deviding the next proxy then a “:” colon then the port number then a space and so on…The last proxy you add should have its port number already inside the Port: space. If you did it, then it should look like this exactly…

Example: Address: 713.234.125.23:80 Port: 80

A wingate is a proxy server that someone installs onto his/her computer which allows for a single or several online connection to take place through port 23 the default telnet port. Relying on their security, some wingates will allow anyone online to connect to them and usually stay “alive” or “working” anywhere from a few days to even months. The’re people out there that scan for these Wingates and post the computer’s IP number or domain on their website to give anyone online a free list of them to use. You can also scan them yourself by using programs like WinScan.

Chaining Wingates Using Telnet
I’m going to accept you already know what telnet is so I will just get right down to it. To chain using telnet you first bring up the DOS prompt and type in “telnet” then your wingate.

C:\WINDOWS>telnet 23

So now you have “telnet” a space the wingate IP a space then the port number 23. Once you’re connected to the wingate it should look like this…

Wingate> 27

You can continue to do this until you’re connected to many Wingates as you need. Once you’re finished with your wingates you would connect to your destination.


So now the entire thing would look something like this!…

C:\Windows> telnet 27

Wingate> 23

Wingate> 23

Connecting to host…Connected

Welcome to the Once and Future M-Net
FreeBSD 4.3 ( (ttypv)

Enter newuser at the login prompt to create a new account
Enter upgrade at the login prompt to find out about increased access